Solar Water Collector

This solar water collector is made up with many solar collectors.This non-pressure solar collector includes three parts:solar collector manifold, solar collector manifold and vacuum tubes. The material is as follows:
1).Inner solar collector manifold: stainless steel 304-2B, 0.41mm thickness
2).Outer solar collector manifold: stainless steel, or drawing steel. 0.36mm thickness
3). Solar collector frame: galvanized steel with 1.5mm thickness, or stainless steel 201 with 1.2mm thickness,
4). Vacuum tube: single target vacuum tube, with coating: AL-N-AL; or three target vacuum tube, with coating: ALN/ALN-SS/CU


This non-pressure solar collector is suitable to low latitude region or countries, such as Asian like Asian, Africa, Oceania,South America and so on.

We have single side of this solar collector from 12tubes to 30 tubes, and two sides of this solar collector from 40 tubes to 60 tubes.

For installation this kinds of solar collector, firstly it need to confirm howmuch square meter installation area for it. One set of this solar collector58mmX1800mmX50tubes, it will space about 8 square meters for the installationarea. And one set of this solar collector 58mmX1800mmX50tubes, it can heatabout 500L hotwater.

Huihao Project Solar Collector
Model NO.	vacuum tube specification			Absorb area	Daily output volume	Quantity(set)		Import Cost (FOB Shanghai Port)
	Dia	Length	Number	(m2)	50 C	20 Container	40 Container	per model